1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
|
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include "marquee.h"
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 32 // OLED display height, in pixels
// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
// The pins for I2C are defined by the Wire-library.
// On an arduino UNO: A4(SDA), A5(SCL)
// On an arduino MEGA 2560: 20(SDA), 21(SCL)
// On an arduino LEONARDO: 2(SDA), 3(SCL), ...
#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
#define LOGO_HEIGHT 30
#define LOGO_WIDTH 30
// 'logoN', 30x30px
const unsigned char epd_bitmap_logoN [] PROGMEM = {
0x00, 0x03, 0x00, 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x08, 0x40, 0x00, 0x00, 0x1c, 0x20, 0x00,
0x00, 0x2a, 0x10, 0x00, 0x00, 0x51, 0x08, 0x00, 0x00, 0xb8, 0x44, 0x00, 0x00, 0x32, 0x22, 0x00,
0x02, 0x70, 0x89, 0x00, 0x04, 0xa3, 0x34, 0x80, 0x08, 0x7f, 0x7f, 0x40, 0x11, 0x67, 0xf7, 0xa0,
0x22, 0x37, 0xb1, 0x70, 0x40, 0x9f, 0xf0, 0x28, 0x84, 0x7c, 0xfa, 0x44, 0x89, 0x7c, 0xf8, 0x84,
0x50, 0x3f, 0xe4, 0x08, 0x3a, 0x27, 0xb1, 0x10, 0x17, 0xaf, 0xda, 0x20, 0x0b, 0xfb, 0xf8, 0x40,
0x04, 0xb3, 0x14, 0x80, 0x02, 0x44, 0x39, 0x00, 0x01, 0x11, 0x12, 0x00, 0x00, 0x88, 0x74, 0x00,
0x00, 0x42, 0x28, 0x00, 0x00, 0x21, 0x50, 0x00, 0x00, 0x10, 0xe0, 0x00, 0x00, 0x08, 0x40, 0x00,
0x00, 0x04, 0x80, 0x00, 0x00, 0x03, 0x00, 0x00
};
marquee_t* marquee;
void setup() {
Serial.begin(9600);
// SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
Serial.println(F("SSD1306 allocation failed"));
for(;;); // Don't proceed, loop forever
}
write_logo();
delay(1000);
marquee = malloc(sizeof(marquee_t));
*marquee = make_marquee("KAI STEVENSON");
}
void loop() {
//check for serial messages
if (Serial.available() > 0) {
int r = 0;
char* bytesRead = malloc(sizeof(char) * 128);
//read until null
while (1) {
int sa = Serial.available();
if (sa > 0) {
r += Serial.readBytes(bytesRead + r, sa);
if (bytesRead[r-1] == '\n') {
bytesRead[r-1] = '\0';
break;
}
}
delay(50);
}
handle_serial_msg(bytesRead);
free(bytesRead);
}
write_marquee(marquee);
if (marquee->scrolledBy == 0) {
delay(500);
}
//check if message needs to be scrolled
if (marquee->doesScroll) {
scroll_marquee(marquee, 3);
}
delay(1);
}
//serial messages start with one byte to identify message type
//messages are null terminated
void handle_serial_msg(char* bytesRead) {
//control messages
if (bytesRead[0] == 'c') {
display.ssd1306_command(bytesRead[1] == '0' ? SSD1306_DISPLAYOFF : SSD1306_DISPLAYON);
}
//marquee messages
else if (bytesRead[0] == 'm') {
*marquee = make_marquee(bytesRead + 1);
}
}
void write_marquee(marquee_t* marquee) {
display.clearDisplay();
//draw chars
//default char size is 5x8, so our char size is 20x32.
//therefore, the maximum number of whole characters to be displayed is 6.
//iterate over string
for (int i = 0; i < marquee->textLength; i++) {
//multiply by 21 for 20 character pixels and 1 space pixel
int charX = (i * 21) - marquee->scrolledBy;
if (charX > -20 && charX < 128) {
display.drawChar(charX, 0, marquee->text[i], SSD1306_WHITE, SSD1306_BLACK, 4);
}
}
display.display();
}
void write_logo() {
display.clearDisplay();
display.drawBitmap(
(display.width() - LOGO_WIDTH ) / 2,
(display.height() - LOGO_HEIGHT) / 2,
epd_bitmap_logoN, LOGO_WIDTH, LOGO_HEIGHT, 1);
display.display();
delay(1000);
}
|
